Allewie Full Size Lift Up Hydraulic Storage Bed Frame Light Beige Review for Everyday Use
Why This Product Is Worth a Look
Storage beds can be practical in bedrooms where adding another dresser or cabinet is not realistic. The Allewie Full Size Lift Up Hydraulic Storage Bed Frame in Light Beige uses the entire area beneath the mattress for storage while maintaining the footprint of a standard full size bed. Its lift up design is especially notable because it does not require side clearance for drawers.
Product Overview
The Allewie Full Size Lift Up Hydraulic Storage Bed Frame is a modern upholstered platform bed made for a standard 54 by 75 inch full mattress. Its primary purpose is to combine mattress support, a decorative headboard, and concealed storage in one piece of furniture.
Instead of pullout drawers, the mattress platform tilts upward with assistance from two gas lift struts. This provides access to a continuous storage area beneath the bed. The available vertical clearance is approximately 10.8 inches, making the space suitable for spare bedding, folded clothing, shoes, seasonal items, and low profile storage bags.
The structure combines a steel frame, central support members, solid wood slats, and upholstered exterior panels. It has a listed maximum weight recommendation of 800 pounds and does not require a box spring. The bed is best suited to apartments, guest rooms, and smaller bedrooms where hidden storage is more important than immediate drawer access.
Design, Build, and Everyday Feel
The light beige upholstery gives this bed a neutral appearance that should work with modern, Scandinavian, minimalist, and transitional rooms. Its 44.5 inch wingback headboard has horizontal channel detailing and lightly padded surfaces. The short wings frame the mattress without extending as far forward as those on a traditional oversized wingback bed.
The headboard can provide some support when sitting up, although the amount remaining visible depends on mattress thickness and pillow arrangement. The upholstered side rails and footboard conceal much of the steel lifting structure, helping the bed look more like a conventional upholstered frame than a mechanical storage platform.
The supplied specifications show slightly different exterior measurements. Depending on the source, the assembled footprint is listed at approximately 79.1 to 79.4 inches long and 56.7 to 57.7 inches wide. The headboard height is consistently listed at 44.5 inches. Anyone placing the bed in a tight room should confirm the current dimensions before ordering and allow additional working space around the foot of the frame.
At 84.9 pounds, the frame is substantial enough that the shipping box may be difficult for one person to move, particularly on stairs. Once correctly assembled, the combination of steel support rails, center legs, and wood slats should create a stable foundation. Foam strips at certain contact points are intended to reduce metal on metal friction and noise.
Key Features
The first feature is the full footprint lift up storage area. The mattress platform rises from the foot of the bed, opening the space beneath it as one large storage cavity. This is more flexible than divided drawers when storing long or irregularly shaped items. However, the approximately 10.8 inch clearance will not accommodate many tall plastic totes or oversized hard shell suitcases.
The second feature is the assisted gas lift mechanism. Although the product name uses the word hydraulic, the platform is supported by gas struts that counterbalance the weight of the mattress. A reinforced fabric strap at the footboard provides a handhold for beginning the lift. Mattress weight affects how easily the platform opens and closes, so performance may vary between lightweight foam mattresses and heavier hybrid models.
The third feature is the no box spring platform. Closely spaced solid wood slats support the mattress directly, while the steel frame and central supports add rigidity. This reduces the overall number of components needed for the bed. It is still sensible to compare the slat arrangement with the support requirements provided by the mattress manufacturer.
The fourth feature is the mattress retention system. Metal retaining brackets near the headboard help prevent the mattress from sliding backward when the platform is tilted. These brackets are useful during regular lifting cycles, although sheets and blankets should still be kept clear of the hinges and other moving components.
The fifth feature is the upholstered wingback headboard. Its horizontal channel pattern adds visual interest without making the design overly decorative. The light beige fabric can brighten a room and coordinate with many colors, but it is also likely to show dust, skin contact marks, and accidental stains more readily than darker upholstery.
Watch the Video Review
What It May Be Like to Use
Based on the available product information, accessing the storage should be fairly straightforward once the correct mattress is installed. Pulling the footboard strap begins the upward movement, and the gas struts assist as the platform rises. When fully elevated, the mechanism is designed to hold the platform open so both hands remain available for organizing stored items.
The platform may feel unusually resistant during assembly if someone tries to lower it before adding a mattress. This is expected because the struts are calibrated to work against mattress weight. Forcing the platform down without the intended counterweight could be difficult and should be avoided in favor of following the supplied instructions.
In typical daily use, this storage format is likely to work best for items that are not needed several times a day. Seasonal clothing, extra blankets, pillows, and travel bags are good examples. Bedside drawers may be faster for frequently used objects because opening this storage area requires lifting the entire mattress platform.
Mattress weight will influence operation. Information provided for the frame indicates that mattresses in a moderate weight range may offer the most balanced movement. A very light mattress could make the platform harder to close, while a mattress approaching the mechanism’s reported 110 pound lifting limit may require a firmer initial pull to raise.
Noise control is another practical consideration. The frame includes EVA foam at structural contact points to reduce friction and squeaking. This is a helpful design detail, but long term quietness will also depend on accurate assembly, proper alignment, and periodically checking the fasteners.
What Works Well
The largest advantage is the amount of hidden storage available without increasing the bed’s footprint. The space is not divided into narrow drawers, so it can hold a broader range of soft and shallow items.
The vertical opening system does not require side clearance. This makes the bed easier to place near a wall, nightstand, or other furniture that could interfere with conventional underbed drawers.
The assisted lift allows the platform to remain elevated while the storage area is in use. This is more convenient than manually holding a heavy mattress platform open.
The steel structure, central supports, and solid wood slats provide a substantial mattress foundation without a box spring. The listed 800 pound maximum recommendation also makes the frame suitable for many common mattress and sleeper combinations, provided all weight and assembly instructions are followed.
The upholstered exterior gives the bed a softer, more finished appearance than a basic metal storage frame. The wingback headboard also serves as a clear focal point for the room.
Things to Consider
Assembly is more involved than it would be with a basic platform bed. The hinge arms, gas struts, slats, supports, and upholstered panels must be aligned correctly. Available information suggests allowing approximately two to three hours and having two people available.
All components are packed in one box weighing just under 85 pounds. Moving the package through a narrow hallway, stairwell, or walk up apartment could be difficult without assistance.
The storage clearance is limited to about 10.8 inches. Wide, shallow containers should fit more appropriately than tall bins, but every container should be measured before purchase.
The light beige upholstery may require more frequent care than gray, black, or other darker fabrics. The listed care instruction is to wipe the frame with a dry cloth, and there is no indication that the upholstery is removable or machine washable.
The 800 pound rating refers to the bed frame’s support capacity, not the amount the gas lift mechanism can raise. The lifting system is reported to support mattress platforms with mattresses weighing up to approximately 110 pounds, so buyers with an especially heavy mattress should verify compatibility.
Who Is This Product For?
This bed is a reasonable option for someone with a small bedroom, limited closet space, or a need to store seasonal belongings out of sight. It may also work well in a guest room where extra bedding and pillows need a dedicated storage location.
It is particularly suitable when furniture placement leaves too little room for side opening drawers. The neutral upholstery may appeal to buyers who want storage without the industrial appearance of an exposed metal frame.
It may be less suitable for anyone who needs to retrieve stored items several times each day, prefers simple one person assembly, or owns tall storage containers and oversized luggage. It may also require extra maintenance in homes where light colored fabric is likely to encounter pets, children, or frequent spills.
Helpful Tips Before You Buy
Measure the room using the frame’s full exterior dimensions rather than the 54 by 75 inch mattress size. Leave enough room at the foot to reach the strap and operate the lift comfortably.
Confirm the weight and thickness of the intended mattress. Mattress weight plays a direct role in how the gas struts behave, and an unusually heavy mattress may be harder to lift.
Measure storage bins before buying them. Choose low profile containers or soft zippered bags that fit within the approximately 10.8 inch clearance.
Arrange for help before moving and assembling the bed. During installation, start all bolts loosely before fully tightening them so the rails and lifting hardware can be aligned. If using a cordless drill, keep it at a low torque setting to avoid stripping hardware or overtightening connections.
Keep hands, loose bedding, and stored items away from the hinges and gas struts. Before reaching beneath the platform, make sure it is fully raised and securely supported.
Vacuum the light beige fabric regularly and address marks according to the manufacturer’s care guidance. Do not assume that the upholstery can be removed, soaked, or machine washed.
Common Questions
Does this bed require a box spring?
No. The included solid wood slats are designed to support a full size mattress directly.
What mattress size does it use?
It is designed for a standard full mattress measuring 54 by 75 inches. The mattress is not included.
How much storage clearance is available?
The reported vertical clearance is approximately 10.8 inches. Shallow bins, folded bedding, shoes, and soft storage bags are more appropriate than tall containers.
Is the lift difficult to operate?
The gas struts are designed to assist with lifting, but ease of operation depends on mattress weight. The platform may be very difficult to lower before the mattress is installed.
Can one person assemble it?
One person may be able to complete some steps, but two people are preferable for moving the box, aligning the frame, and installing the lift mechanism. Assembly may take approximately two to three hours.
What does the 800 pound rating mean?
It is the listed maximum weight recommendation for the assembled bed frame. It should not be confused with the lifting capacity of the gas struts.
Final Thoughts
The Allewie Full Size Lift Up Hydraulic Storage Bed Frame in Light Beige offers a useful combination of hidden storage, mattress support, and upholstered styling. Its strongest advantage is the large continuous storage area, which can be opened without the side clearance required by drawers. The gas assisted platform, mattress retaining brackets, solid wood slats, and steel support structure are all practical additions.
The main compromises are the time and care required for assembly, the limited storage height, and the extra maintenance associated with light beige fabric. Mattress weight also needs to be considered because it affects the lifting action.
Overall, this bed is worth considering for smaller rooms and homes where concealed storage is a priority. It is less compelling for people who want fast access to multiple small compartments or a frame that can be assembled and moved easily by one person.
Post a Comment
0 Comments